Tag

troubleshooting heating furnace systems

Browsing

It’s chilly and snowy outside, but inside your house is the eternal spring. Stable furnace system is one of the things that makes every house a warm and cozy home. And we literally mean it. But while you enjoy a relaxed atmosphere and summer temperatures in the middle of the winter, the heating system suddenly stops working. Now what?

If a certified handyman installed a heating system in your house and if the parts are original, the probability of a breakdown is minimal. In order to prevent furnace issues, you have to do regular maintenance and servicing of the system. The manufacturers of stoves and other parts of the heating system recommend doing this at least once a year. If you don’t take care of your furnace, failures can become more frequent.

Good news – you can fix the majority of common breakdowns without calling the furnace repair experts. These bugs do not require a lot of tools and knowledge, but you need some skill and determination. Even if you’re not quite sure of your handyman skills at the end of it all, you can always hire a professional.

Thermostat Issues

Maybe the problem in your heating system is right in front of your nose. The thermostat is the first thing to look at if the furnace doesn’t work well. Sometimes, the thermostat doesn’t show the right temperature, or it does not send a signal when you set the heating. Because of the wrong thermostat reading, you are afraid to raise the temperature inside your house even though you’re freezing.

Modern heating systems have thermostats with many functions. First, check all the settings. Then, check the battery, and replace it as needed. While doing this, experts from Maple Ridge furnace repair services suggest wiping the inside of the device. Sometimes the collected dust can cause a problem with the thermostat. Finally, do a detailed inspection of the wires connecting the thermostat with the furnace. Electrical cloves and tape are a great first aid to standby if some minor wire is interrupted.

Clogged Filters

If you have filters in furnaces, check them regularly. Try to remember when they were replaced or cleaned. Although it doesn’t seem like a big deal; old and clogged filters can make a huge mess. Dirt and dust will reduce the airflow, which causes the stove to put in more effort while trying to warm your house unsuccessfully. This can cause damage to the circuit breaker and eventually cause a problem with the fan.

The solution is to change or clean filters, at least monthly during the winter months. Pet owners and families with kids should do this maintenance more often because dirty filters are the ideal place for collecting the bacteria.

Regular Cleaning of Stove and the Area around It

You’ve probably noticed that dust and dirt are the biggest enemies of your heating system. Most house owners usually place stoves in basements or separated rooms and forget about them. But it is equally important to clean these areas regularly. The same goes for the chimney and air blowers.

Do not use the room where the stove is located to store things. The area around the furnace must be tidy because it is easy to flare up something flammable. Clean the furnace before the heating season and after you finally turn the heating off. Besides being warmer inside your house, regular maintenance of the heating system can bring you significant savings.

More helpful tips on how to spare money find on this webpage: https://cashmoneylife.com/save-on-heating-bills/.

Check the Drains and Ducts

Some heating systems use water that circulates through the pipes and thus enable heat emission. If you have this kind of heating system; sediments, mould, and dirt can deposit inside drains and ducts. This creates a blockage that prevents water circulation through the system.

If you suspect that pipes in your heating system are clogged, you should flush them. If the water inside them is muddy and stinks, you can use bleach or special chemicals for cleaning the drains. Use these products according to the manual.

As for the bleach, dilute it with water in a ratio of 1 to 4 (1 scoop of bleach and 4 scoops of water). Inject the mixture into the tube, and let it work for a few minutes. Rinse with clean, hot water and repeat the procedure if the deposits are stubborn to remove.

If you notice that some room in your house is cold even if the heating is on, there may be a failure in the water flow. Check the pipe system and if you find some gaps, close them with a special metal duct tape. You must know that this is a temporary solution and it’s useful only in the event of an emergency. Just to be sure it won’t cause further failures in your heating system, you should call the professionals in to fix the problem.

You don’t have to be an expert in housework to fix your heating system. For starters, it’s enough to understand how the furnace and its essential parts work so that you know what and where to look for in the event of a breakdown. Also, you’ll need some basic tools that every one of us should have in our garage. Thankfully, you can find a lot of useful stuff on the Internet so, if you don’t want to pay for the furnace service, you can always ask Google for help.